Skip to content

Garage storage that goes on the wall, the ceiling and the floor

Shop Ultrawall on Amazon
Blue Ultrawall pegboard panels with hand tools and blue bins over a wooden shelf

Ultrawall · Pegboard

Ultrawall Pegboard & Bins

Ultrawall pegboard is powder-coated steel, punched to take standard 1/8 inch and 1/4 inch hooks. Pick plain panels if you already own hooks, a full kit if the wall is bare, or rail bins for screws and small parts. 13 designs in all.

  • 13 designs
  • 28 sizes and colors
  • pieces in the box 2–210 pcs
  • from $23.74

Find the right fit

13 designs

Filter

Type
Panel size
Color
Price
Rating

Best for

Which Ultrawall pegboard set is best for my garage?

A bare wall, finished today: the 48 × 36 in Pegboard Wall Organizer, four panels, six rails, two shelves and ten bins in one box, rated to 1,200 pounds in total.

Type against type

How do Ultrawall pegboard sets compare by type?

4 ways to get the same things off the floor, and when each one is the better pick.

Ultrawall Pegboard & Bins by type
PointSteel panelsFull kitHook setRail bins
What you getPanels onlyPanels, rails, shelves, bins and hooksHooks, racks and small binsRails and lift-off bins
Pieces2–445–10517–21015–20
Starts atfrom $23.74from $47.49from $25.99from $36.99
Better choice whenYou own hooks and want to grow a wall a few panels at a timeThe wall is bare and you want it done in an afternoonYour board is up and needs more ways to hang thingsSmall hardware matters more than hand tools

How to

Installing and using pegboard sets

How do I hang Ultrawall pegboard panels on drywall?

In 4 steps, as the install card in the box shows: mark the corner holes with the panel held level, drill and push in the anchors, screw the panel to the wall, then repeat for the next panel. The kits ship with screws and expansion tubes for drywall, brick and concrete.

Do I need 1/4 inch or 1/8 inch pegboard hooks?

Either. Our steel panels are punched for both 1/8 inch and 1/4 inch hooks, and the hook sets fit both board sizes on 1 inch spacing. Hooks made for 1/4 inch boards sit tighter in the holes.

What if a pegboard panel arrives bent?

Thin 24 by 12 inch steel panels can be pressed in transit. Ask for a new panel from your order page rather than bending the old one back.

A 48 by 36 inch Ultrawall pegboard wall with a top shelf, orange bins and hanging hand tools

Plan before you drill

Garage Pegboard: Hole Sizes, Hooks, Layout and Load

How to plan a steel pegboard wall: 1/8 or 1/4 inch hooks, panel sizes and price per square foot, studs and anchors, layout by job, kits compared and what the load ratings mean.

Read the guide

Ultrawall Pegboard on Amazon